Pro-face PFXGP4501TAA Handbuch

*36HULHV+DUGZDUH0DQXDO

10

Specifications 100 Structural SpecificationsNOTE: z If you are using the rear mount model, refer to Structural Specifications (see page 182). NOTE:

GP4000 Series Hardware Manual 101NOTICESTORAGE AND OPERATION OUTSIDE OF SPECIFICATIONSz Store the panel in areas where temperatures are within the

Specifications 102 Display Specifications*1 Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.*2 You can s

GP4000 Series Hardware Manual 103Memory, Clock, and Touch PanelMemory*1 Capacity available for user application (internal memory).*2 Up to 60,000 s

Specifications 104 Interface SpecificationsSerial Interface COM1Serial Interface COM2USB InterfaceEthernet InterfaceSD Card InterfaceSD Card slot x 1

GP4000 Series Hardware Manual 105Specifications of Serial Interface COM1IntroductionNOTE: For instructions on how to connect to other devices, alwa

Specifications 106 Recommendations:z Cable Connector: XM2D-0901 manufactured by OMRON Corporation.z Cable Cover: XM2S-0913 manufactured by OMRON Corp

GP4000 Series Hardware Manual 107Specifications of Serial Interface COM2IntroductionNOTE: For instructions on how to connect to other devices, alwa

Specifications 108 GP-4503T: D-Sub 9 pin socket connector via an RS-485, PROFIBUS, or MPI cable.NOTE: *1 You can supply power to the Siemens PROFIBUS

GP4000 Series Hardware Manual 109Dimensions NOTE: z If you are using the rear mount model, refer to Dimensions (see page 184).External Dimensions:

11GP4000 Series Hardware Manual1GP4000 Series Har dware Man ualOverviewKanpaiHar dwareManual 10/2 011OverviewOverviewThis chapter describes the GP

Specifications 110 External Dimensions: GP-4501TW1 Front2 Right Side3 TopPPLQ

GP4000 Series Hardware Manual 111Installation with Installation Fasteners: GP-4501T / GP-4503T1 Left Side2 Front3 Right Side4 Top5 Bottom

Specifications 112 Installation with Installation Fasteners: GP-4501TW1 Left Side2 Front3 Right Side4 Top5 Bottom

GP4000 Series Hardware Manual 113Dimensions with Cables: GP-4501T1 Left Side2 Rear3 Right Side4 Top5 Bottom6 DC type units have power supply

Specifications 114 Dimensions with Cables: GP-4501TW1 Left Side2 Rear3 Right Side4 Top5 BottomNOTE: All the above values are designed with cable

GP4000 Series Hardware Manual 115Dimensions with Cables: GP-4503T1 Left Side2 Rear3 Right Side4 Top5 BottomNOTE: All the above values are desi

Specifications 116 Panel Cut DimensionsCreate a panel cut and insert the GP unit into the opening from the front.NOTE: Before designing the panel cut

GP4000 Series Hardware Manual 1174.5 GP-4600 SeriesWhat Is in This Section?This section contains the following topics:Topic PageElectrical Specific

Specifications 118 Electrical SpecificationsDC Model AC ModelPower SupplyRated Input Voltage 24 Vdc 100...240 VacInput Voltage Limits 19.2...28.8 Vdc

GP4000 Series Hardware Manual 119Environmental Specifications Air quality requirementsDo not operate or store the GP unit where chemicals evaporate

Overview 12 GP unit Package ContentsNote:z For information on the package contents for the rear mount model, refer to Package Contents (see page 172)

Specifications 120 Structural SpecificationsNOTE: z If you are using the rear mount model, refer to Structural Specifications (see page 182). NOTE:

GP4000 Series Hardware Manual 121NOTICESTORAGE AND OPERATION OUTSIDE OF SPECIFICATIONSz Store the panel in areas where temperatures are within the

Specifications 122 Display Specifications*1 Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.*2 You can s

GP4000 Series Hardware Manual 123Memory, Clock, and Touch PanelMemory*1 Capacity available for user application (internal memory).*2 Up to 60,000 s

Specifications 124 Interface SpecificationsSerial Interface COM1Serial Interface COM2USB InterfaceEthernet InterfaceSD Card InterfaceSD Card slot x 1

GP4000 Series Hardware Manual 125Specifications of Serial Interface COM1IntroductionNOTE: For instructions on how to connect to other devices, alwa

Specifications 126 Interfit bracket is #4-40 (UNC).Recommendations:z Cable Connector: XM2D-0901 manufactured by OMRON Corporation.z Cable Cover: XM2S

GP4000 Series Hardware Manual 127Specifications of Serial Interface COM2IntroductionNOTE: For instructions on how to connect to other devices, alwa

Specifications 128 GP-4603T: D-Sub 9 pin socket connector via an RS-485, PROFIBUS, or MPI cable.NOTE: *1 You can supply power to the Siemens PROFIBUS

GP4000 Series Hardware Manual 129Dimensions NOTE: z If you are using the rear mount model, refer to Dimensions (see page 184).External Dimensions1

GP4000 Series Hardware Manual 13Certifications and StandardsNote:z For information on the certifications and standards of the rear mount model, ref

Specifications 130 Installation with Installation Fasteners1 Left Side2 Front3 Right Side4 Top5 Bottom26010.2430111.85 31512.40562.2050.202419.4

GP4000 Series Hardware Manual 131Dimensions with Cables: GP-4601T1 Left Side2 Rear3 Right Side4 Top5 Bottom6 DC type units have power supply

Specifications 132 Dimensions with Cables: GP-4603T1 Left Side2 Rear3 Right Side4 Top5 BottomNOTE: All the above values are designed with cable

GP4000 Series Hardware Manual 133Panel Cut DimensionsCreate a panel cut and insert the GP unit into the opening from the front.NOTE: Before designi

Specifications 134

135GP4000 Series Hardware Manual5GP4000 Series Har dware Man ualInstallatio n and Wiri ngKanpaiHar dwareManual 10/2 011Installation and WiringWhat

Installation and Wiring 136 5.1 InstallationNOTE: z If you are using the rear mount model, refer to Installation (see page 220).Installation Procedur

GP4000 Series Hardware Manual 137Panel Mounting ProcedureWhen installing the GP unit in a slanted position, the GP unit face should not incline mor

Installation and Wiring 138 Step Action1 Place the GP unit on a clean and level surface with the display facing downward.2 Check that the GP unit’s g

GP4000 Series Hardware Manual 1396 Insert each of the fasteners shown below. Make sure you pull the fastener back until it is flush with the rear o

Overview 14 KC MarkingsDANGERPOTENTIAL FOR EXPLOSIONz Verify that the power, input and output (I/O) wiring are in accordance with Class I, Division 2

Installation and Wiring 140 Removal ProcedureStep Action1 Loosen the installation fasteners (4) from the GP unit.2 Remove the GP unit slowly from the

GP4000 Series Hardware Manual 1415.2 Wiring PrinciplesOverviewThis section presents the GP unit wiring principles.What Is in This Section?This sect

Installation and Wiring 142 Connecting the AC Power CordNOTE: The shield ground (SG) and FG terminals are connected internally in the GP unit unit.AC

GP4000 Series Hardware Manual 143How to connect the AC Power CordStep Action1 Confirm the power cord is not connected to the power supply.2 Open th

Installation and Wiring 144 Connecting the DC Power CordNOTE: The shield ground (SG) and FG terminals are connected internally in the GP unit.DC Powe

GP4000 Series Hardware Manual 145GP-4500 Series / GP-4600 SeriesNOTE: The DC power supply connector (plug) for GP-4200 Series / GP-4300 Series / GP

Installation and Wiring 146 NOTE: z Do not solder the wire directly to the power receptacle pin.z To prevent the possibility of a terminal short, use

GP4000 Series Hardware Manual 147Connecting the Power SupplyPrecautionsz You must use a 24 Vdc input unit with a Class 2 power supply.z To increase

Installation and Wiring 148 z Ground the surge absorber (E1) separately from the GP unit (E2).z Select a surge absorber that has a maximum circuit vo

GP4000 Series Hardware Manual 149GroundingExclusive GroundingWhen supplying power to the GP unit, separate the input/output and power lines as show

GP4000 Series Hardware Manual 15GP Series of PanelsCritical systems, alarms and handling RequirementsCritical alarm indicators and system functions

Installation and Wiring 150 5.3 SD Card Insertion/RemovalWhat Is in This Section?This section contains the following topics:Topic PageIntroduction 15

GP4000 Series Hardware Manual 151IntroductionNOTICELOSS OF DATAWhen using the GP unit and a SD Card, observe the following to avoid losing valuable

Installation and Wiring 152 Inserting the SD CardNOTE: As shown in the image below (example on the left-hand side), you can set the Write-Control Tab

GP4000 Series Hardware Manual 1532 Insert the SD Card into the SD Card interface, and push until you hear it “click”.3 Close the SD Card cover.Step

Installation and Wiring 154 Before Removing the SD CardDo not remove the SD Card while it is being accessed. Doing so could corrupt the data on the S

GP4000 Series Hardware Manual 155Removing the SD CardStep Action1 Make sure the SD Card Access LED is off.1 SD Card Access LED2 Push down the tab

Installation and Wiring 156 SD Card Data BackupTo make your backups, you can either insert the SD Card directly into the SD Card interface on your co

GP4000 Series Hardware Manual 1575.4 USB Cable ClampOverviewThis section presents the USB cable clamp.What Is in This Section?This section contains

Installation and Wiring 158 USB Cable Clamp for USB (Type A)IntroductionWhen using a USB device, attaching a USB cable clamp to the USB interface to

GP4000 Series Hardware Manual 159Removing the USB CableRemove the USB cable while pushing the grip section of the clip.3 As shown, pass the tie thr

Overview 16 Handling the LCD panelThe following characteristics are specific to the LCD panel and are considered normal behavior:z LCD screen may sho

Installation and Wiring 160 USB Cable Clamp for USB (mini-B)IntroductionWhen using a USB device, you can attach a USB cable clamp to the USB (mini-B)

GP4000 Series Hardware Manual 1611 USB clamp2 USB cable(2)(1)(1)

Installation and Wiring 162

163GP4000 Series Hardware Manual6GP4000 Series Hardware ManualKanpaiHar dwareManual 10/2011MaintenanceOverviewThis chapter explains how to maintain

164 Regular CleaningCleaning the displayWhen the surface or the frame of the display gets dirty, soak a soft cloth in water with a neutral detergent,

GP4000 Series Hardware Manual 165Replacing the Installation GasketNOTE: z If you are using the rear mount model, refer to Installation (see page 22

166 The gasket must be inserted correctly into the groove for IP65F moisture resistance for the GP unit.4 The upper surface of the gasket should prot

GP4000 Series Hardware Manual 167Periodic Check PointsOperation Environmentz Is the operating temperature within the allowable range? Refer to Envi

168 Replacing the Primary BatteryIntroductionThe replacement battery (sold separately) for the primary battery in the GP unit is available from Pro-f

GP4000 Series Hardware Manual 169 Step Action1 Disconnect the power supply from the GP unit.2 Touch the housing or ground connection (not the power

17GP4000 Series Hardware Manual2GP4000 Series Hardware ManualConnecti vityKanpaiHar dwareManual 10/2011Device ConnectivityIntroductionThis chapter p

170 6 First close the replacement battery cover, then close the SD Card Interface Cover.NOTE: Make sure the cables are inserted completely inside the

171GP4000 Series Hardware Manual7GP4000 Series Hardware ManualKanpaiHar dwareManual 10/2011Rear Mount ModelOverviewThis chapter presents the Rear Mo

172 7.1 Package ContentsVerify all items listed here are present in your package:1 GP unit: 12 DC power supply connector: 1 *13 USB cable clamp Ty

GP4000 Series Hardware Manual 1737.2 Certifications and StandardsIntroductionPro-face submitted this product for independent testing and qualificat

174 KC MarkingsDANGERPOTENTIAL FOR EXPLOSIONz Verify that the power, input and output (I/O) wiring are in accordance with Class I, Division 2 wiring

GP4000 Series Hardware Manual 1757.3 Option Items / Maintenance OptionsThis section explains the option items and maintenance options dedicated for

176 7.4 Parts Identification and FunctionsPFXGP4301TADRSide PFXGP4301TADRRightRearBottomPart Name DescriptionA USB (Type A) Interface Conforms to USB

GP4000 Series Hardware Manual 177PFXGP4401TADRF SD Card Interface Cover/Replacement Battery Insertion CoverFor information on how to open the cover

178 B Serial Interface (COM1) RS-232C Serial Interface. Connector: D-Sub 9 pin (plug) x 1.C Serial Interface (COM2) RS-422/485 Serial Interface. Conn

GP4000 Series Hardware Manual 179PFXGP4501TADRSide PFXGP4501TADRRearBottomPart Name DescriptionA Power Plug Connector -B SD Card Access LED This la

Connectivity 18 System DesignIntroductionThe following diagrams represent equipment you can connect to the GP unit.COM1 COM2GP-4201T RS-232C or RS-42

180 PFXGP4601TADRSide PFXGP4601TADRRearBottomPart Name DescriptionA Power Plug Connector -B SD Card Access LED This lamp lights up when SD Card is in

GP4000 Series Hardware Manual 181LED Indications(1)Maintenance LED*1 For details on the Standby Mode function and on the operations to use in the s

182 7.5 Structural Specifications NOTE: (1) Protection structure equivalent to IP65F*1 can be expected if you affix the Overlay (sold separately) on

GP4000 Series Hardware Manual 183Also, if non-approved oils are present, it may cause deformation or corrosion of the front panel's plastic co

184 7.6 Dimensions<Panel Type/ Standard Mount : PFXGP4301TADR>Installation with Installation Fasteners attached to the top and bottom surfaces

GP4000 Series Hardware Manual 185<Panel Type/ Standard Mount : PFXGP4301TADR>Installation with Installation Fasteners attached to the sides o

186 <Panel Type/ Standard Mount : PFXGP4301TADR>Dimensions with Cables1 Right Side2 Rear3 Left Side4 Bottom5 TopNOTE: All the above values

GP4000 Series Hardware Manual 187<Panel Type/ Flat Mount : PFXGP4301TADR>Installation with Installation Fasteners attached to the top and bot

188 <Panel Type/ Flat Mount : PFXGP4301TADR>Installation with Installation Fasteners attached to the sides of the GP unit1 Right Side2 Front3

GP4000 Series Hardware Manual 189<Panel Type/ Flat Mount : PFXGP4301TADR>Dimensions with Cables1 Right Side2 Rear3 Left Side4 Bottom5 To

GP4000 Series Hardware Manual 19RUN Mode Peripherals - COM1: RS-232CNOTE: For instructions on how to connect to other devices, always refer to the

190 <Resin BossType/ Standard Mount and Flat Mount : PFXGP4301TADR>Installation with Installation Fasteners attached to the top and bottom surf

GP4000 Series Hardware Manual 191<Resin Boss Type/ Standard Mount and Flat Mount : PFXGP4301TADR>Installation with Installation Fasteners att

192 <Resin Boss Type/ Standard Mount and Flat Mount : PFXGP4301TADR>Dimensions with Cables1 Right Side2 Rear3 Left Side4 Bottom5 TopNOTE:

GP4000 Series Hardware Manual 193<Panel Type/ Standard Mount : PFXGP4401TADR>Installation with Installation Fasteners attached to the top and

194 <Panel Type/ Standard Mount : PFXGP4401TADR>Installation with Installation Fasteners attached to the sides of the GP unit1 Right Side2 Fr

GP4000 Series Hardware Manual 195<Panel Type/ Standard Mount : PFXGP4401TADR>Dimensions with Cables1 Right Side2 Rear3 Left Side4 Bottom5

196 <Panel Type/ Flat Mount : PFXGP4401TADR>Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit1 R

GP4000 Series Hardware Manual 197<Panel Type/ Flat Mount : PFXGP4401TADR>Installation with Installation Fasteners attached to the sides of th

198 <Panel Type/ Flat Mount : PFXGP4401TADR>Dimensions with Cables1 Right Side2 Rear3 Left Side4 Bottom5 TopNOTE: All the above values are

GP4000 Series Hardware Manual 199<Resin BossType/ Standard Mount and Flat Mount : PFXGP4401TADR>Installation with Installation Fasteners atta

2 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products c

Connectivity 20 RUN Mode Peripherals - COM1: RS-232C or RS-422/RS-485 NOTE: For instructions on how to connect to other devices, always refer to the

200 <Resin Boss Type/ Standard Mount and Flat Mount : PFXGP4401TADR>Installation with Installation Fasteners attached to the sides of the GP un

GP4000 Series Hardware Manual 201<Resin Boss Type/ Standard Mount and Flat Mount : PFXGP4401TADR>Dimensions with Cables1 Right Side2 Rear3

202 <Panel Type/ Standard Mount : PFXGP4501TADR>Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit

GP4000 Series Hardware Manual 203<Panel Type/ Standard Mount : PFXGP4501TADR>Installation with Installation Fasteners attached to the sides o

204 <Panel Type/ Standard Mount : PFXGP4501TADR>Dimensions with Cables1 Right Side2 Rear3 Left Side4 Bottom5 TopNOTE: All the above values

GP4000 Series Hardware Manual 205<Panel Type/ Flat Mount : PFXGP4501TADR>Installation with Installation Fasteners attached to the top and bot

206 <Panel Type/ Flat Mount : PFXGP4501TADR>Installation with Installation Fasteners attached to the sides of the GP unit1 Right Side2 Front3

GP4000 Series Hardware Manual 207<Panel Type/ Flat Mount : PFXGP4501TADR>Dimensions with Cables1 Right Side2 Rear3 Left Side4 Bottom5 To

208 <Resin BossType/ Standard Mount and Flat Mount : PFXGP4501TADR>Installation with Installation Fasteners attached to the top and bottom surf

GP4000 Series Hardware Manual 209<Resin Boss Type/ Standard Mount and Flat Mount : PFXGP4501TADR>Installation with Installation Fasteners att

GP4000 Series Hardware Manual 21*1 When connecting the CA3-ISO232-01, the COM port’s pin 9 setting should be VCC. You can define COM port settings

210 <Resin Boss Type/ Standard Mount and Flat Mount : PFXGP4501TADR>Dimensions with Cables1 Right Side2 Rear3 Left Side4 Bottom5 TopNOTE:

GP4000 Series Hardware Manual 211<Panel Type/ Standard Mount : PFXGP4601TADR>Installation with Installation Fasteners attached to the top and

212 <Panel Type/ Standard Mount : PFXGP4601TADR>Installation with Installation Fasteners attached to the sides of the GP unit1 Right Side2 Fr

GP4000 Series Hardware Manual 213<Panel Type/ Standard Mount : PFXGP4601TADR>Dimensions with Cables1 Right Side2 Rear3 Left Side4 Bottom5

214 <Panel Type/ Flat Mount : PFXGP4601TADR>Installation with Installation Fasteners attached to the top and bottom surfaces of the GP unit1 R

GP4000 Series Hardware Manual 215<Panel Type/ Flat Mount : PFXGP4601TADR>Installation with Installation Fasteners attached to the sides of th

216 <Panel Type/ Flat Mount : PFXGP4601TADR>Dimensions with Cables1 Right Side2 Rear3 Left Side4 Bottom5 TopNOTE: All the above values are

GP4000 Series Hardware Manual 217<Resin BossType/ Standard Mount and Flat Mount : PFXGP4601TADR>Installation with Installation Fasteners atta

218 <Resin Boss Type/ Standard Mount and Flat Mount : PFXGP4601TADR>Installation with Installation Fasteners attached to the sides of the GP un

GP4000 Series Hardware Manual 219<Resin Boss Type/ Standard Mount and Flat Mount : PFXGP4601TADR>Dimensions with Cables1 Right Side2 Rear3

Connectivity 22 RUN Mode Peripherals - COM1: RS-485 (isolation)NOTE: For instructions on how to connect to other devices, always refer to the “GP-Pro

220 7.7 InstallationInstallation MethodPanel type: Weld the stud bolts to the panel, and then tighten the nuts to fasten the GP unit to the panel.Res

GP4000 Series Hardware Manual 221Installation Requirementsz Decide on the thickness of the enclosure wall, based on the level of strength required:

222 z When installing the GP unit in a slanted position, the GP unit face should not incline more than 30°.z When installing the GP unit in a slanted

GP4000 Series Hardware Manual 223Panel Cut Dimensionsz Standard mounta) Installation positions of stud bolts or positions of boss molds when attach

224 Unit mm[in.]Note: Note that the panel cut dimensions have been calculated with the display area, not the panel cut (A or B), as the reference.Att

GP4000 Series Hardware Manual 225z Flat mounta) Installation positions of stud bolts or positions of boss molds when attaching installation bracket

226 Unit mm[in.]Note: Note that the panel cut dimensions have been calculated with the display area, not the panel cut (A or B), as the reference.Att

GP4000 Series Hardware Manual 227Panel TypeNOTICEPANEL UNSTEADY WHEN UNSECUREDz Keep GP unit stabilized in the panel-cut while you are installing o

228 Installation procedureStep Procedure Details1 Cut an opening in the panel to match the standard mount or flat mount panel cut dimensions, and the

GP4000 Series Hardware Manual 2292 Attach the installation gaskets to the panel.Installation gaskets are included for the standard mount orientatio

GP4000 Series Hardware Manual 23RUN Mode Peripherals - COM2: RS-422/RS-485NOTE: For instructions on how to connect to other devices, always refer t

230 3 Slowly peel the protective sheet off of the GP unit's screen.Note: Peeling off the protective sheet with excessive force may peel off the

GP4000 Series Hardware Manual 2318 When you are installing the GP unit horizontally, hold the GP unit so that the arrow pointing in the horizontal

232 10When installing the GP unit with the flat mount orientation, affix the Overlay to the front of the GP unit.In advance, align the four corners o

GP4000 Series Hardware Manual 233Removal procedureNOTICEBROKEN ENCLOSUREz Attach correctly without a crevice between gaskets and between gasket and

234 Resin Boss TypeInstallation procedureNOTICEPANEL UNSTEADY WHEN UNSECUREDz Keep GP unit stabilized in the panel-cut while you are installing or re

GP4000 Series Hardware Manual 235A) Resin plateB) Boss diameter: ø10.5 mm ± 0.5 mm (ø 0.41 in. ± 0.02 in.)C) Lower hole depth: 6 mm (0.24 in.) or m

236 2 Attach the installation gaskets to the panel.Installation gaskets are included for the standard mount orientation and for the flat mount orient

GP4000 Series Hardware Manual 2373 Slowly peel the protective sheet off of the GP unit's screen.Note: Peeling off the protective sheet with ex

238 10 When installing the GP unit with the flat mount orientation, affix the Overlay to the front of the GP unit.In advance, align the four corners

GP4000 Series Hardware Manual 239NOTICEGASKET AGINGz Inspect the installation gasket periodically as required by your operating environment to keep

Connectivity 24 RUN Mode Peripherals - COM2: RS-485 (isolation)NOTE: For instructions on how to connect to other devices, always refer to the “GP-Pro

240 Removal procedureStep Procedure Details1 Remove the screws from the four bosses fixed in place on the rear surface of the resin plate, and then s

GP4000 Series Hardware Manual 25RUN Mode Peripherals - USB Type A / mini-B Interface*1 For supported models, refer to Pro-face’s support site “Otas

Connectivity 26 Edit Mode Peripherals*1 For supported models, refer to Pro-face’s support site “Otasuke Pro!” (http://www.pro-face.com/otasuke/). You

GP4000 Series Hardware Manual 27AccessoriesSerial Interface ItemsProduct Name Product Number DescriptionRS-232C Cable (5m) CA3-CBL232/5M-01 Connect

Connectivity 28 USB Interface Items*1 For supported models, refer to Pro-face’s support site “Otasuke Pro!” (http://www.proface.com/otasuke/). You ca

GP4000 Series Hardware Manual 29SD Card ItemsOption Items*1 Please use "12.1-inch Environment Cover" for GP-4501TW (10.4-inch model).*2 T

3GP4000 Series Hardware ManualTable of ContentsSafety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5About the Book. . .

Connectivity 30 Maintenance Options*1 Does not include GP-4100 Series, GP-4201TM, or GP-4301TM.*2 These options cannot be used with the rear mount mo

31GP4000 Series Hardware Manual3GP4000 Series Har dware Man ualParts/FunctionsKanpaiHar dwareManual 10/2 011Parts Identification and FunctionsParts

Parts/Functions 32 *1 Status LED operations are as shown below:*2 Ethernet LED operations are as shown below.C USB (Type A) Interface Conforms to USB

GP4000 Series Hardware Manual 33GP-4300 Series Parts IdentificationNOTE: z If you are using the rear mount model, refer to Parts Identification and

Parts/Functions 34 *1 Status LED operations are as shown below:*2 SD Card Access LED operations are as shown below.*3 Ethernet LED operations are as

GP4000 Series Hardware Manual 35GP-4400 Series Parts IdentificationNOTE: z If you are using the rear mount model, refer to Parts Identification and

Parts/Functions 36 *1 Status LED operations are as shown below:BottomPart Name DescriptionA Status LED*1B USB (Type A) Interface Conforms to USB2.0 (

GP4000 Series Hardware Manual 37*2 SD Card Access LED operations are as shown below.*3 Ethernet LED operations are as shown below.Color Indicator D

Parts/Functions 38 GP-4500 Series Parts IdentificationNOTE: z If you are using the rear mount model, refer to Parts Identification and Functions (see

GP4000 Series Hardware Manual 39*1 Status LED operations are as shown below:*2 SD Card Access LED operations are as shown below.*3 Ethernet LED ope

4 4.4 GP-4500 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Electrical Specifications. . . . . .

Parts/Functions 40 GP-4600 Series Parts IdentificationNOTE: z If you are using the rear mount model, refer to Parts Identification and Functions (see

GP4000 Series Hardware Manual 41*1 Status LED operations are as shown below:*2 SD Card Access LED operations are as shown below.*3 Ethernet LED ope

Parts/Functions 42

43GP4000 Series Hardware Manual4GP4000 Series Har dware Man ualSpecific ationsKanpaiHar dwareManual 10/2 011SpecificationsOverviewThis chapter pres

Specifications 44 4.1 GP-4200 SeriesWhat Is in This Section?This section contains the following topics:Topic PageElectrical Specifications 45Environm

GP4000 Series Hardware Manual 45Electrical SpecificationsPower SupplyRated Input Voltage 24 VdcInput Voltage Limits 19.2...28.8 VdcVoltage Drop 2 m

Specifications 46 Environmental Specifications Air quality requirementsDo not operate or store the panel where chemicals evaporate, or where chemical

GP4000 Series Hardware Manual 47Structural Specifications *1 The front face of the GP unit, installed in a solid panel, has been tested using cond

Specifications 48 NOTICESTORAGE AND OPERATION OUTSIDE OF SPECIFICATIONSz Store the panel in areas where temperatures are within the panel’s specifica

GP4000 Series Hardware Manual 49Display Specifications*1 Please refer to the GP-Pro EX Reference Manual for details on font types and character cod

5§GP4000 Series Hardware ManualSafety InformationImportant InformationNOTICERead these instructions carefully, and look at the equipment to become f

Specifications 50 Memory, Clock, and Touch PanelMemory*1 Capacity available for user application.*2 Up to 60,000 steps can be converted in software.

GP4000 Series Hardware Manual 51When used for backup:Approximately 100 days, with a fully charged battery.Approximately 6 days, with a half-charged

Specifications 52 Interface SpecificationsSerial Interface COM1Serial Interface COM2USB InterfaceEthernet InterfaceNOTE: GP-4201TW does not have an E

GP4000 Series Hardware Manual 53Specifications of Serial Interface COM1IntroductionNOTE: For instructions on how to connect to other devices, alway

Specifications 54 Interfit bracket is #4-40 (UNC).Recommendations:z Cable Connector: XM2D-0901 manufactured by OMRON Corporation.z Cable Cover: XM2S-

GP4000 Series Hardware Manual 55Interfit bracket is #4-40 (UNC).Recommendations:z Cable Connector: XM2D-0901 manufactured by OMRON Corporation.z Ca

Specifications 56 CAUTIONLOSS OF COMMUNICATIONz All connections to the communication ports must not put excessive stress on the ports.z Securely atta

GP4000 Series Hardware Manual 57Specifications of Serial Interface COM2IntroductionNOTE: For instructions on how to connect to other devices, alway

Specifications 58 DimensionsExternal Dimensions1 Front2 Right Side3 TopPPLQ

GP4000 Series Hardware Manual 59Installation with Installation Fasteners1 Left Side2 Front3 Right Side4 Top5 Bottom

6 PLEASE NOTEElectrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed b

Specifications 60 Dimensions with Cables: GP-4201T1 Left Side2 Rear3 Right Side4 Top5 BottomNOTE: All the above values are designed with cable b

GP4000 Series Hardware Manual 61Dimensions with Cables: GP-4201TW1 Left Side2 Rear3 Right Side4 Top5 BottomNOTE: All the above values are desi

Specifications 62 Dimensions with Cables: GP-4203T1 Left Side2 Rear3 Right Side4 Top5 BottomNOTE: All the above values are designed with cable b

GP4000 Series Hardware Manual 63Panel Cut DimensionsCreate a panel cut and insert the GP unit into the opening from the front.NOTE: Before designin

Specifications 64 4.2 GP-4300 SeriesWhat Is in This Section?This section contains the following topics:Topic PageElectrical Specifications 65Environm

GP4000 Series Hardware Manual 65Electrical SpecificationsPower SupplyRated Input Voltage 24 VdcInput Voltage Limits 19.2...28.8 VdcVoltage Drop 5 m

Specifications 66 Environmental Specifications Air quality requirementsDo not operate or store the panel where chemicals evaporate, or where chemical

GP4000 Series Hardware Manual 67Structural SpecificationsNOTE: z If you are using the rear mount model, refer to Structural Specifications (see pag

Specifications 68 NOTICESTORAGE AND OPERATION OUTSIDE OF SPECIFICATIONSz Store the panel in areas where temperatures are within the panel’s specifica

GP4000 Series Hardware Manual 69Display Specifications*1 Please refer to the GP-Pro EX Reference Manual for details on font types and character cod

GP4000 Series Hardware Manual 7GP4000 Series Model NamesThank you for purchasing Pro-face’s GP4000 Series unit (hereafter referred to as the "

Specifications 70 Memory, Clock, and Touch PanelMemory*1 Capacity available for user application (internal memory).*2 Up to 60,000 steps can be conve

GP4000 Series Hardware Manual 71Clock± 65 seconds per month (deviation at room temperature and power is OFF). Variations in operating conditions an

Specifications 72 Interface SpecificationsSerial Interface COM1Serial Interface COM2USB InterfaceEthernet InterfaceSD Card InterfaceGP-4301T/GP-4303T

GP4000 Series Hardware Manual 73Specifications of Serial Interface COM1IntroductionNOTE: For instructions on how to connect to other devices, alway

Specifications 74 Recommendations:z Cable Connector: XM2D-0901 manufactured by OMRON Corporation.z Cable Cover: XM2S-0913 manufactured by OMRON Corpo

GP4000 Series Hardware Manual 75Specifications of Serial Interface COM2IntroductionNOTE: For instructions on how to connect to other devices, alway

Specifications 76 GP-4303T: D-Sub 9 pin socket connector via an RS-485, PROFIBUS, or MPI cable.NOTE: *1 You can supply power to the Siemens PROFIBUS

GP4000 Series Hardware Manual 77Dimensions NOTE: z If you are using the rear mount model, refer to Dimensions (see page 184).External Dimensions1

Specifications 78 Installation with Installation Fasteners1 Left Side2 Front3 Right Side4 Top5 Bottom

GP4000 Series Hardware Manual 79Dimensions with Cables: GP-4301T/GP-4301TW1 Left Side2 Rear3 Right Side4 Top5 BottomNOTE: All the above values

8 Global CodeA global code is assigned to every Pro-face product as a universal model number.For more information on product models and their matchin

Specifications 80 Dimensions with Cables: GP-4303T1 Left Side2 Rear3 Right Side4 Top5 BottomNOTE: All the above values are designed with cable b

GP4000 Series Hardware Manual 81Panel Cut DimensionsCreate a panel cut and insert the GP unit into the opening from the front.NOTE: Before designin

Specifications 82 4.3 GP-4400 SeriesWhat Is in This Section?This section contains the following topics:Topic PageElectrical Specifications 83Environm

GP4000 Series Hardware Manual 83Electrical SpecificationsPower SupplyRated Input Voltage 24 VdcInput Voltage Limits 19.2...28.8 VdcVoltage Drop 5 m

Specifications 84 Environmental Specifications Air quality requirementsDo not operate or store the GP unit where chemicals evaporate, or where chemic

GP4000 Series Hardware Manual 85Structural SpecificationsNOTE: z If you are using the rear mount model, refer to Structural Specifications (see pag

Specifications 86 NOTICESTORAGE AND OPERATION OUTSIDE OF SPECIFICATIONSz Store the panel in areas where temperatures are within the panel’s specifica

GP4000 Series Hardware Manual 87Display Specifications*1 Please refer to the GP-Pro EX Reference Manual for details on font types and character cod

Specifications 88 Memory, Clock, and Touch PanelMemory*1 Capacity available for user application (internal memory).*2 Up to 60,000 steps can be conve

GP4000 Series Hardware Manual 89Interface SpecificationsSerial Interface COM1Serial Interface COM2USB InterfaceEthernet InterfaceSD Card InterfaceS

9GP4000 Series Hardware ManualAbout the BookAt a GlanceDocument ScopeThis document describes how to use the GP unit.Validity NoteThis document is va

Specifications 90 Specifications of Serial Interface COM1IntroductionNOTE: For instructions on how to connect to other devices, always refer to the “

GP4000 Series Hardware Manual 91Interfit bracket is #4-40 (UNC).Recommendations:z Cable Connector: XM2D-0901 manufactured by OMRON Corporation.z Ca

Specifications 92 Specifications of Serial Interface COM2IntroductionNOTE: For instructions on how to connect to other devices, always refer to the “

GP4000 Series Hardware Manual 93Dimensions NOTE: z If you are using the rear mount model, refer to Dimensions (see page 184).External Dimensions1

Specifications 94 Installation with Installation Fasteners1 Left Side2 Front3 Right Side4 Top5 Bottom2188.581736.811596.262048.0350.20602.361666

GP4000 Series Hardware Manual 95Dimensions with Cables1 Left Side2 Rear3 Right Side4 Top5 BottomNOTE: All the above values are designed with c

Specifications 96 Panel Cut DimensionsCreate a panel cut and insert the GP unit into the opening from the front.NOTE: Before designing the panel cut,

GP4000 Series Hardware Manual 974.4 GP-4500 SeriesWhat Is in This Section?This section contains the following topics:Topic PageElectrical Specifica

Specifications 98 Electrical SpecificationsDC Model AC ModelPower SupplyRated Input Voltage 24 Vdc 100...240 VacInput Voltage Limits 19.2...28.8 Vdc

GP4000 Series Hardware Manual 99Environmental Specifications Air quality requirementsDo not operate or store the GP unit where chemicals evaporate,